Epoxy floors are really strong and they look nice, but sometime they get some troubles. Bubbling and peeling is two common problem that happen after you put the epoxy on. If you see your epoxy floor start bubbling or peeling, no need to panic. This article going to explain why these thing occur and how you can fix it. At Yuru, we want to make sure your epoxy flooring paint stay looking good and last long time, so lets get into it.
What Causes Bubbling and Peeling in Epoxy Floors?
Bubbling and peeling on epoxy floors come from different reason. One main cause is moisture. If concrete have too much water in it before apply epoxy, bubbles will form. The moisture get trapped underneath and make small pocket that look like bubble. Another thing is bad mixing the epoxy. When you don't mix the parts good enough, it cure not even and cause peeling. Also applying epoxy when weather is hot can make issue. In hot temp, epoxy dry too fast and that lead to bubbling. Dirt and dust on floor before put epoxy also make it peel off later because surface not clean, epoxy can't stick well. Using old epoxy or one that expire can cause problem too, it just don't work right. And if you apply epoxy too thick, bubble can appear while it cure. These problem annoying, but know them is first step to solve.
What Are the Best Practices for Epoxy Floor Installation?
To stop bubbling and peeling, you gotta follow some good practice when install epoxy floor. First always check moisture in concrete before put epoxy. Use moisture meter for that. If level too high, better wait till it dry. Next mix Epoxy floor paint exactly like instruction say. Follow ratio careful so it cure proper. Its good idea apply epoxy when temp between 60 and 85 F. This range help it cure even. Cleaning floor very well is important step too. Sweep and mop to remove dust or dirt. If crack or hole, fill them first. Use grinder or sander make surface smooth. Putting primer can help stick better. When apply epoxy use roller and don't make layer too thick. Thin layer cure better and prevent bubble. And give enough time for epoxy cure fully before walk on it or put furniture. These tip can give you nice epoxy floor that last years.
At Yuru, we know beautiful floor make any space better, and we here to help you do it right. Whether DIY or hire pro, remember these tip make big difference. Taking time prepare surface and follow step proper will avoid problem later. Happy flooring.
What to Do When Your Epoxy Floor Starts Peeling?
If your epoxy floor peeling, important act fast. Peeling happen because maybe not prepare floor good or use wrong epoxy type. First look careful at peeling area. Is it small spot or many place? Know how big problem help decide next step. If peeling small, you can fix without redo whole floor. Carefully scrape peeling part with putty knife. Be gentle don't damage around. Then clean spot good, no dust left. Use vacuum or damp cloth. When clean and dry, apply new epoxy layer there. Follow package instruction for good result. If peeling big and cover lot area, maybe need remove all epoxy paint floor and start again. This take more time but give strong beautiful floor. Also think why peeling happen first time. That way you avoid same issue future. Yuru can help find right epoxy and give tip so your floor stay great for long.
How to Choose the Right Epoxy for High-Quality Results?
Choose right epoxy very important if want floor look good and last. Not every epoxy same. Some better for certain place. First think where you put it. Garage, basement or living room? Each have different need. Like garage need epoxy handle oil spill and tire mark. Living room maybe want nice look and easy clean. Yuru have different type epoxy you choose depend on use. Next check quality. Look for durable one resist scratch and stain. Read review or ask people who use it. This help find good epoxy meet your need. Also consider color and finish. Some like shiny, other prefer matte. Yuru got variety color and finish so match your style. Last make sure epoxy easy mix and apply. Some two part need mix, other ready use. Pick one comfortable for you to get best result.
Troubleshooting Tips
When have epoxy floor, good know some fix tip for problem come up. If bubble appear, maybe too much moisture in air or apply too thick. If see bubble, use small pin pop them careful. After that maybe need thin new epoxy layer make smooth. Always follow drying time on label, it prevent bubble later. If floor still sticky after dry, probably not mix good or too thick. Then sand sticky part and apply new layer. Clean surface well before new epoxy. Also if see discoloration some area, could from sun direct or harsh chemical. Use gentle cleaner and put rug where sun hit. Regular check help floor stay top shape. Yuru say check floor often for trouble sign and fix early. With these tip, your epoxy floor keep looking beautiful and last many years.
